Reader Comments

Tips On How To Deal With A Plumbing Problem

by Stephan Stuart (2019-04-25)


Plumbing is one of those jobs that you should not do your self. If it is something easy like a toilet repair or changing out a faucet, go ahead and give it a try. If it is a major repair, then you are better off hiring a contractor and it may be required to have a licensed plumbing contractor do the work looking for a plumber in temecula you.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

Check your water meter frequently to detect if there is a leak in your pipeline. If you are not using a lot of water during a period of time and your water meter rises, this can be a clear indication of a leak. Replace leaks as soon as possible to prevent further plumbing issues.

It is important to clean your faucet's aerator from time to time. Not cleaning it can cause lime buildup, which in turn, could cause water leaks or low water pressure. To clean a aerator, you can unscrew it from the faucet, dip a brush into vinegar, and use the brush to clean it.

When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn't work, try a chemical drain cleaner.

As the weather is becoming colder due to the coming of winter, be sure that your external faucets do not have leaks or drips. If the faucets have these problems, they will have to be repaired before temperatures reach the freezing point. If your pipes freeze, no matter what they are made of, water pressure may make them crack. Even the most minute crack can cause a big enough leak to create flooding or water damage and mold in your home.